Table of contents
- Before you start
- Beginner's Guide
- Downloads
- Configuration
- Compatibility
- Telemetry
- WHOOP Section
- Troubleshooting
- SilverHardware
- Go Brushless
- Tuning a quad
- Quadcopter mods
- Merchandise
- Links
Sidebar
silf4ware-wiring
SilF4ware Hardware Wiring
NRF24 Mini
| Pin | Function |
|---|---|
| 1 | VCC (needs to be bridged with CE) |
| 2 | GND |
| 3 | CE (needs to be bridged with VCC) |
| 4 | CSN |
| 5 | SCK |
| 6 | MOSI |
| 7 | MISO |
| 8 | IRQ (not used) |
Omnibus
See SilF4ware/STM32F405 Omnibus/board_pinout.jpg
| Omnibus | NRF24 Mini |
|---|---|
| 3.3V | VCC (bridge with CE) |
| GND | GND |
| CE (bridge with VCC) | |
| SBUS_PPM | CSN |
| LED_STRIP | SCK |
| TX1 | MOSI |
| RX1 (DSM) | MISO |
| IRQ |
NOX
See SilF4ware/STM32F411 NOXE/board_pinout.jpg
| NOX | NRF24 Mini |
|---|---|
| 3.3V | VCC (bridge with CE) |
| GND | GND |
| CE (bridge with VCC) | |
| NSS A15 | CSN |
| CLK B03 | SCK |
| MOSI B05 | MOSI |
| MISO B04 | MISO |
| IRQ |
silf4ware-wiring.txt · Last modified: 2020/07/07 13:59 by d7ab6ba3
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
