Table of contents
- Before you start
- Beginner's Guide
- Downloads
- Configuration
- Compatibility
- Telemetry
- WHOOP Section
- Troubleshooting
- SilverHardware
- Go Brushless
- Tuning a quad
- Quadcopter mods
- Merchandise
- Links
This is an old revision of the document!
This Wiki should introduce and help in and on a project, RCGroups user silverxxx has started in september 2015. Have a nice reading!
Feel free to leave a comment right at the bottom of the start page.
Lately, there is a readme in this Wiki that provides a short overview of what Silverware is capable of and provides some quickstart infos.
Features:
GigaDevice Boards:
STM32 Boards
Question | Answer |
---|---|
What PWM frequency is the best? | The pwm frequency changes the linearity of the motors (due to their inductance) and as such it can have an effect on flight. For 720 motors 8Khz seems to result in linear thrust. Some 6mm motors are similar. Increasing frequency reduces thrust at low throttle, so it can help with wobbles that occur while descending. 820 motors are still somewhat nonlinear even at 32Khz |
Question | Answer |
---|---|
My quad is drifting in flight | Try the accelerometer calibration: Place the copter on a level surface, throttle low, roll&yaw center, and pitch down three (3) times in quick succession. The LEDs will blink alternating while the calibration is in process. |
How do I fly acro without crashing all the time? | “There is an art to flying, or rather a knack. Its knack lies in learning to throw yourself at the ground and miss. … Clearly, it is this second part, the missing, that presents the difficulties.” |
STlink, spare props, good quality motors, batteries and so on.
We all no doubt know the joys of the slow boat from China but hey they are cheap and available at Banggood