Differences

This shows you the differences between two versions of the page.

--- h8mini [2020/02/24 16:54]
fenrisulven
+++ h8mini [2020/02/27 07:44] (current)
ian446
@@ Line 3: / Line 3: @@
 {{:h8mini.jpg?nolink&400|H8 mini}}
-The H8 mini, branded by multiple constructors notably Eachine and JJRC, was one of the very first toy quads to be hacked in order to introduce an accro mode, thus leading to the creation of Silverware. It's known to fly pretty well while being dirt cheap.
+The H8 mini, branded by multiple constructors notably Eachine and JJRC, was one of the very first toy quads to be hacked in order to introduce an accro mode, thus leading to the creation of Silverware. It has the reputation to fly pretty well while being dirt cheap.
-Despite the external look of these quads that didn't seemed to have changed notably since the first releases, multiple versions were sold using internally different hardware. Some of them could be compatible with Silverware and some are not.
+The H8mini has an [[https://www.rcgroups.com/forums/showthread.php?2512604-Eachine-H8-mini-acro-firmware|impressively long thread on rcgroups]] centralizing the discussions about it.
-Here is an as-exhaustive-as-possible list of the boards we can find shipped with this little quad:
+Despite the external look of these quads that doesn't seem to have changed notably since the first releases, multiple versions were sold using internally different hardware. Some of them could be compatible with Silverware and some are not.
+Here is an as-exhaustive-as-possible list of the boards we can find shipped on these little quads by chonological order:
   * The **green board**  (not sold anymore): Known to be flashable using the [[https://github.com/silver13/h8mini-acro|h8mini-acro]] or the [[https://github.com/silver13/h8mini-dual|h8mini-dual]] versions of the firmware.
   * The **blue board**  (not sold anymore): Known to be flashable using the [[https://github.com/silver13/H8mini_blue_board|H8mini_blue_board]] version.
-  * The **new blue board**  (still sold as far as we know, hard to distinguish for the old blue board): Not flashable.
+  * The **new blue board**  (still sold as far as we know, hard to distinguish from the old blue board): Not flashable.
-  * The **red board**  (still sold as far as we know): Known to be similar to the board used by the **H8S 3D**  and the **Floureon H101**. Is flashable using the [[https://github.com/silver13/H101-dual|H101-dual]] version.
+  * The **red board**  (still sold as far as we know): Known to be a variant of the board used in the **H8S 3D**  and the **Floureon H101**. Is flashable using the [[https://github.com/silver13/H101-dual|H101-dual]] version.
+At the time of writing (Feb 2020), if you order one of these quads you should randomly get a new blue board or a red board.
-At the time of writing, if you order one of these quads you might randomly get a new blue board or a red board.
+Also, multiple users reported that the mode 1 version of the transmitter sold with the H8 mini was in fact a mode 3 transmitter. [[https://www.youtube.com/watch?v=4etuQGDJwPc|There is a method to convert it to mode 1]]

Silverware Wiki

User Tools

Site Tools

Differences

Page Tools