Differences

This shows you the differences between two versions of the page.

--- sbus [2017/10/04 07:49]
silverxxx
+++ sbus [2017/10/04 07:52] (current)
silverxxx
@@ Line 15: / Line 15: @@
 **Safety**
-The SBUS input could possible be decoded up incorrectly; it's recommended to test the quad without props first, or in a controlled manner, to make sure the channel order is correct. The correct order is AETR. One may also check the failsafe function at this point, by turning the tx off, while throttle is up.
+Although some checks are made, the SBUS input could possible be decoded incorrectly; it's recommended to test the quad first in a safe manner, to make sure the channel order is correct ( especially throttle ). The correct order is AETR. One may also check the failsafe function at this point, by turning the tx off, while throttle is up.

Silverware Wiki