===== Silverware FC =====

{{  http://bitviper.org/projects/silverware/silverware-nrf-16-v1/silverware-nrf-16-v1-model-top.png?nolink&150x150}}{{  https://static.rcgroups.net/forums/attachments/6/0/8/1/2/2/t10584268-2-thumb-silverware-nrf-16-v1-model-bottom.png?nolink&150x150}}

**Facts**:\\
\\
- 20x20mm board with 16x16mm holes\\
- Powerd by an STM32F030F4P6 (same as H8mini Blue board, BWHOOP B03, Eachine E011 and similar)\\
- MPU 6050 Gyro\\
- NRF24L01 Radio Chip onboard\\
- [[:sbus|S.Bus receiver supported ]]\\
- Directly usable for 1-3S Lipos, for >3S a BEC (e.g. from ESC) is required\\
- 2 Spare out\\
- Full Bayang telemetry support (reporting Battery voltage, rf strength) on Devo / Jumper T8SG TX , possible also for Multimoduled Frsky TX\\
\\
This FC is based on an idea of **Ian444**, who is the head behind that project. The developmental history can be read in [[https://www.rcgroups.com/forums/showthread.php?2634611-CG023-alternate-firmware-(acro-level)/page175#post38663731|CG023 acro thread]]\\
\\
[[https://www.rcgroups.com/forums/showthread.php?3003790-Dedicated-Brushless-Silverware-FC|RCGroups Thread for Silverware FC]]

Thanks to all that brought in their ideas, had thoughts and made this thing happen\\
\\
Special Thanks to **BitViper **for the PCB design!\\
\\
Schematics and Links to the board & part list can be found [[http://bitviper.org/projects/silverware/|here]]. Get started, **(but for now, do that on your own risk )!** \\
\\
Needed [[https://www.rcgroups.com/forums/showthread.php?3003790-Dedicated-Brushless-Silverware-FC/page11#post38902406|changes]] of Bwhoop-B03 Silverware to work with SilverwareFC elaborated by **Ian444**

**{{  https://static.rcgroups.net/forums/attachments/4/7/0/8/6/1/a10661612-99-DSCF0313a.JPG?nolink&533x400  |static.rcgroups.net_forums_attachments_4_7_0_8_6_1_a10661612-99-dscf0313a.jpg}}**

**{{  :chaotix:img_0937.jpg?nolink&  |img_0937.jpg}}**